![]() Your game should now be available from the Retroid game menu. Only the short emulator core names are shown, so if you can't figure out which emulator is the correct/best, you may need to search for those names online. Move the highlight to the appropriate emulator name with the d-pad, and then press "A" to select it. A window will pop up, asking you to choose an emulator for this game.Using the controls shown on the right side of the screen, select a game to add to the Retroid's game menu.Move the highlight to " External games management" with the d-pad or left thumbstick, and then press "A" to select it.Move the highlight to " Enter game settings" with the d-pad or left thumbstick, and then press "A" to select it.In the Retroid system, hold the "HOME" button until the system menu appears.If it is in Android mode, switch to Retroid mode. If you switched the RP2 off, turn it on again. Don't forget that the micro SD card should be inserted with the face (printed side) down (away from the screen side), and the back (plain black side with metal connectors) up (toward the screen side). Push it into the slot until you hear a soft click this will be a little further in than flush with the edge of the slot. Reinsert the micro SD card into your RP2.Once the copy is complete, safely eject the micro SD card from the computer. This might also be a good time to make a backup of the files that came on the RP2's included micro SD card, in case something happens to the card later. It may be necessary to use uncompressed files with no spaces in their filenames. On the computer, copy any ROM files you want to transfer into the "/games/download/" folder on the micro SD card.If you see such a message, try using a different card reader, or a different computer. There is (probably) nothing wrong with it, and it contains hard-to-replace files that are required by Retroid. If your computer tells you that the card must be formatted before use, DO NOT FORMAT THE CARD. Connect the micro SD card to a computer with a suitable card reader.Do not use tweezers or any metal tools, as you will probably damage the slot. Pushing it in slightly until it makes a soft click will cause a spring to push it out so you can grab it easily. It is held in place by a mechanism kind of like a clicky ballpoint pen. After you lift the flap (it's NOT a plug that comes out completely), push the card INTO the slot slightly with your thumbnail. The micro SD card slot is on the bottom of the unit, under a rubber flap. If you aren't sure how to do that, just turn the unit off completely (not just standby), then remove the card. Safely eject your original 32GB micro SD card from the RP2.If they don't exactly match the way you've set up your own RP2, you'll already know enough to change those steps on your own, so we'll assume that you're doing this with a unit fresh from the factory. These instructions should guide you through that process. While the Retroid OS comes with some games preinstalled, as well as access to the Retroid "online store", you may want to add your own game backups to the Retroid OS menu.
0 Comments
Leave a Reply. |